E-MY2

E-MY2C and E-MY2H rodless actuators have both the operationability of an air cylinder and the speed controllability of an electric actuator. Besides positioning at both ends, stopping at an intermediate point of your choice is possible. The motor mounting position is user selectable and can either be on the top, bottom, left or right of the actuator. Auto switches are available.

LG1

Compact electric actuator, series LG1, uses a high rigidity, high linear precision guide, with reduced height and space saving design. Height is reduced by nearly 39% and length is reduced by nearly 62mm compared with SMC product LJ series. Two types of construction are available, non-coupling type with feed screw and motor directly coupled reduced length & coupling type with feed screw and motor joined by a coupling installation of nonstandard motors is possible.

LG1

Series LJ1 is a uniaxial electric actuator available in a high rigidity direct acting guide type (LJ1H), or a direct acting slider guide type (LJ1S). The completely flat top surface of the LJ1 series improves freedom in mounting of work pieces. With the slider guide, slide screw type, low drive noise of 47dB or less is possible.

LTF

The LTF is an electric actuator with a linear guide built into the actuator body. The series is compact and lightweight, designed to save space. Martensitic stainless steel material is standard for this frame type linear guide and the frame is electro-less nickel-plated.

LX

The LXF series is a low profile, short stroke electric actuator. The system is designed to be compact for easy system integration. Basic structure of the LXF consists of a linear motion guide, a stepper motor and an ACME lead screw. The standard stepper motor can be replaced with motors from other manufacturers.